Steel helmet SSh-40 good condition

$ 27.9
In Stock

Soviet helmet, the original from military depots, model 1940, produced in the 1950-70s. Not repainted (original factory paint).Canvas strap (the ends are sewn to the ears of the helmet), 3 cushions of the comforter of dermatine (black or brown).

All helmets were used (second hand). They have obvious signs of employment (small scratches to the metal, oil stains, darkening of the paint) or storage (small areas of rust). Examples are shown in the photo. We can photograph a specific helmet for you before you buy. The helmet is in very good condition, but not new. Helmets are ready for immediate use in the military historical reenactment of World War II — without any restoration.

How to choose the size?

There were only 3 helmet sizes named "rost" (literally: height). The 1st was the smallest. How to determine your size if you're not an ortodox-reenactor and didn't browse the Red Army archives? If you have long and meager face and your head is under 22 inches (57 cm) in girth, then you should take size 1. If you're a big man with a large round face and your head in bigger than 23 inches (60 cm), then you should take size 3. If you are an average man with a head of 58-60 cm — take growth 2 (average).

A person with any head can wear any size of helmet SSh-40. These do not have a rigid size, the sphere itself is still very large. The head is guaranteed to fit, will not reap, it will be convenient. The only question is how correctly the size of the helmet will look with the width of the face (the size of the head).

Each military box contains 30 helmets:
Size 1 — 15 pieces;
Size 2 — 14 pieces;
Size 3 — 1 piece only.

Sizes 1 and 2 are visually different in depth and diameter of the shell (the shell size 1 is narrower and deeper), size 3 is like 2 in diameter, but has different geometry of the occipital part. You don't feel the difference when it's on your head if you adjust the cord of the liner to your size.

We do not have size 3. And it will not.

How to care for the product?

The helmet can be cleaned with water and a detergent or alcohol (and other light solvent). Please don’t bathe a helmet in water (don't immerse it), because comforter pads (or pillows) are filled with organic material (hair, tow, hay), which can begin to rot from getting wet. Also, the material of the pads (dermatin) is not always of high quality, when completely wet, it can begin to give paint to the inside packing, which will ruin their appearance.

The liner is easy to disassemble: the pillows can be removed simply by bending the legs of the brackets that hold them. After removal, you can pillows can refurbish pillows, replace packing and even dermatin. A helmet (without pillows) can be treated with a harsh detergent.

To hide the scratches, a clean helmet is covered with a layer of any oil, and then wipe off the excess. The color becomes more even, the surface is dull and beautifully shiny, whitish scratches are hidden.


Above is the helmet after storage in the warehouse: scuffs are visible. Below is a similar helmet, but wiped with solvent from dirt and covered with engine oil, which hides whitish scratches.

Historical reference.

Model SSh-40 (СШ-40, literraly: steel helmet 40) appeared as the follower of the SSh-39 and was the same dome (experts say that the shape of the dome became more round, but it is more likely because of the production technology than because of engineering solutions). New liner in the SSh-40 was composed of three leatherette (how it's common to say today "eco-leather") pads filled with a sort of hair. These sit on the metal brackets  attached to the helmet by six rivets. So the helmet called "six-riveted" (shesti-kljopka) unlike its predecessor, the model 1939 "three-riveted" (trjokh-kljopka). The innovation of the developers was that the liner pads could be removed (or at least the tie cord) and wear a helmet over the winter cap. Despite this advantage, the liner is considered uncomfortable: the helmet was not fixed on the head, and constantly had to be adjusted by hand when moving.

In 1968 a new model appeared. It had prolate dome (as an egg). Due to the fact that the helmet had the same color and almost the same form, some "patriots" often roaming in it at historical events... These same SSH-40 is already in short supply, the boom of liberation from their domestic warehouses is on the market more and more of SSH-68. And SSH-40 military production and is a collector's item and are valued more.