SS cap trapezoid for officers

$ 23.3
In Stock

A great copy of the trapezoid insignia for the SS officer M43 cap. Silver thread on a black background. The patch is made by BeVo technology and has the correct wrong side. Figures reproduced as detailed as possible. A rare thing!

How to sew the patch? There are 2 ways.

I. Method for museum copies. Trim the excess along the contour of the insignia with a margin of 5 mm. Tuck these 5 mm under the insignia and iron (you may use glue). Fasten the stripe on the clothes with a few stitches of threads of bright color, so it sits smoothly. Sew the stripe along the contour with small stitches (seam around the edge). Remove the bright thread that fixed the insignia.

II. Way to for reenactment (easier). Remove threads from the inside of the stripe using the scissors or razor to make it thinner. Glue the patch onto thin paper or fabric using tailor's glue or PVA. Dry it using an iron (if the glue is liquid then you should use as little glue as possible, otherwise it can leak on the front side). Cut the patch along the contour with no margin. Fasten the stripe on the clothes with a few stitches of threads of bright color, so it sits smoothly. Sew the stripe along the contour with small stitches (seam around the edge). Remove the bright thread that fixed the insignia.